E-Mu MP-7 command station Owner's Manual page 112

O O O O
By Popular Request ->
_ _ _ _
Important: If you
choose location 001.01.001 the
program change will only occur
when the pattern is first selected.
See page 130 for details.
   
See page 196 for more
information about MIDI Bank
Select commands.
100 E-MU Systems
Press the right Cursor button to move the cursor underneath the Event
6.
Scroll Field (<->).
Turn the data entry control to scroll through the event list and locate
7.
the event you want to edit.
Move the cursor to the data field you want to edit and make changes
8.
using the data entry control.
Press the Pattern Edit button to exit the Pattern Edit module.
9.
To Insert an Internal or External MIDI Program Change
Select the pattern you wish to edit.
1.
Press the Pattern Edit button.
2.
Insert the Program Change Event
Scroll to the Event List Editor screen shown below using the data entry
3.
control.
Press the Enter button as prompted by the display to begin editing.
4.
Select an Empty Track using the Track/Channel select button near the
5.
LCD. (Use an empty track for now to keep things simple.) The display reads:
T
06 EVENT
- no events in track -
Press the right Cursor button to move the cursor underneath the Time
6.
Field.
Turn the data entry control and set the time to the location where you
7.
want the program change to occur.
Move the cursor to the lower line of the display and select the "prog"
8.
event type as shown below.
T
06 EVENT
C01 prog: 50
MIDI Channel
Set the MIDI channel, program change number and bank select LSB
9.
and MSB if applicable. If the bank selects are set to "off" no bank select
command will be transmitted.
Press Repeat and change the data fields as desired if you want to insert
10.
another program change or other event.
<-> 001.01.001
<-> 003.02.026
m:0
Program No. Bank LSB
Sequencer
Pattern Edit Menu
l:1
Bank MSB