Table of Contents
Advertisement
O O O O
To Quick-Select a Track:
1. Press and hold Tap.
2. Press the Track Enable/Mute
button corresponding to the
track you wish to select.
To Record a Pattern using Grid Recording
Press the Pattern mode button. The screen shown below appears.
1.
T
01 STOP
0
000
Start of IT
Select an empty sequence to begin recording using the data entry
2.
control.
For now, set the pattern Length to 1 Bar. This will make Grid mode
3.
easier to understand at first.
Press the Record button. The Realtime LED illuminates and the screen
4.
shown below appears.
T
01 REC
Quan: 8
Press the Record button again. The Grid LED illuminates and the screen
5.
shown below appears.
Track
Number
T
01 GRID
B: 01. 1
Bar:Beat
Gate/Velocity
Press the Preset View button and select a preset to use for track one. A
6.
"prc" or "kit" preset might be a good choice. Press the Preset View
button again after you've made your selection to return to the Grid
recording screen.
Select a note using the rubber keypads. Press the transposition buttons
7.
to find other sounds. Note that the Current Key field in the LCD
changes as you play the keypad.
Now turn on a few of the grid buttons. It doesn't matter which for now.
8.
Press Play. You'll be hearing some sort of rhythm.
9.
Go ahead and change the grid buttons. Play around until you get
10.
something you like.
Ln: 08
Bar: 01. 1
Ln: 01
Bar: 01. 1
Met: on
Current
Key
_ _ _ _ _ _ _ _
K: C1
_ _ _ _ _ _ _ _
Vel:000
Note
Select
Gate/Velocity
Sequencer
Pattern Mode
Cnt: 0
8 note
positions
8 note
positions
MP-7 Owners Manual 67
Advertisement
Table of Contents
