E-Mu MP-7 command station Owner's Manual page 78

O O O O
Press and hold Play, then
press Record while a pattern is
playing to jump right into Grid
Record mode.
66 E-MU Systems
The grid can be set up for 16th notes, 32nd notes, 8th note triplets or 16th
note triplets.
When using 32nd notes or recording patterns longer than one bar, the grid
displays as much of the pattern as it can then switches to the next section.
When playing one bar of 32nd notes, for example, the sixteen grid buttons
and LEDs show the first 16 notes, then switch to the second group of
sixteen notes.
The liquid crystal display shows the status of the16 grid locations.
T
01 GRID
B: 1. 1
The time signature determines how the grid is laid out. The pattern below is
in 3/4 time and so only12 locations are needed.
T
01 GRID
B: 1. 1
Grid mode can also be used in conjunction with either of the other record
modes. You can go into grid record mode and edit a pattern you created in
realtime record mode, or you could start with grid recording and record
over it in either realtime or step mode.
To examine a pattern in grid mode, place the cursor under the Key field and
turn the data entry control while the pattern is playing. When you find a
recorded note, you'll see bars appear and the grid button LEDs will
illuminate.
K: D5
03 V: 127
K: D5
03 V: 127
Sequencer
Pattern Mode
1
32
1
32