Table of Contents
Advertisement
_ _ _ _
In order to send program
changes to external devices, the
Track must be assigned to an
"external" channel. See page 94
for details.
Poly Pressure Edit
Polyphonic pressure messages are assigned on a per note basis and have
range of 0-127. MP-7 can generate polyphonic pressure messages, but it
cannot receive them.
Poly Pressure Screen
T
01 EVENT
C01
polypress:
Program Change Edit
Program change numbers from 0-127, and on any bank number, can be
inserted, deleted or edited in this screen. If you do not select bank numbers
(off), the program change will be sent to the currently selected bank. See
"Bank Select Commands" on page 196.
Program Change Screen
T
01 EVENT
C01
prog: 10
To Edit a MIDI Event
Select the pattern you wish to edit.
1.
Press the Pattern Edit button.
2.
Scroll to the Event List Editor screen shown below using the data entry
3.
control.
Press the Enter button as prompted by the display to begin editing.
4.
Select the Track that you want to edit using the Track/Channel select
5.
button near the LCD.
T
01
EVENT
C01
controller #1
<->
002.03.004
C1
MIDI
Note
<->
003.02.026
m:off
Program
Bank
Change
Number MSB
Number
cc:0
<->
002.03.008
v:52
Sequencer
Pattern Edit Menu
62
Poly Pressure
Value
l:off
Bank
Number LSB
cc:32
MP-7 Owners Manual 99
Advertisement
Table of Contents
