Adding The Filter Envelope - E-Mu MP-7 command station Owner's Manual

Adding the Filter Envelope

Now let's modulate the Filter Frequency with the Filter Envelope. The Filter
Envelope is a device that can automatically change the filter frequency
during the course of the note. Before we define the Filter Envelope, we need
to patch the Filter Envelope to the Filter Frequency.
To Setup the Filter Envelope
Go to the PatchCord screen by pressing the Cords Jump Key.
1.
L1
PATCHCORD
RlsVel
Move the cursor below the first field in the bottom line of the display.
2.
This is the Source field. Use the data entry control to change the
Source to "FiltEnv" as shown in the following illustration.
Advance the cursor to the next field. This is the Destination field. Use
3.
the data entry control to change the destination to "FiltFreq."
Move the cursor to the last field in the line. This is the Amount field.
4.
The Amount field determines the amount of modulation applied. Set
this value to "+100."
L1
PATCHCORD
FiltEnv+
This setup connects the Filter Envelope Generator to the Filter Cutoff as
shown in the following diagram.
Instrument
Now, return to the Filter Envelope Mode screen. Set the Mode to
5.
"time-based."
-> AmpVol
-> FiltFreq
Filter
DCA
Fc Q
Filter Env.
Preset Programming
Editing Presets
#01
+100
#01
+100
R
Pan
L
MP-7 Owners Manual 303