Local Control On/Off - E-Mu MP-7 command station Owner's Manual

Local Control On/Off

Curve 1
Played Pressure
Curve 3
Played Pressure
Local Control is used to disconnect the keypad and controllers (knobs,
touchstrip, footswitches) from the sound generating section. Even though
disconnected from the internal synthesizer, the keypad and controllers are
still transmitted over MIDI. Local Control is normally turned Off when
recording into an external MIDI sequencer (set sequencer to Echo Thru).
Played data and recorded data are merged in the computer sequencer and
then sent back to the module. This feature can also be used if you want to
control another MIDI sound generator from the rubber keypads without
playing internal sounds.
LOCAL CONTROL
on
MIDI local control mode change messages can either be accepted or
ignored depending on the setting of the change field. With this set to
"ignored", an incoming command to turn local control on or off would be
ignored.
Controllers Menu
Local Control On/Off
Curve 2
Linear
Played Pressure
Curve 4
Played Pressure
CHANGE
ignored
MP-7 Owners Manual 135