Selecting And Quick Editing Presets - E-Mu MP-7 command station Owner's Manual

Selecting and Quick
Editing Presets
Bank
2
125
To Audition a Preset
Select Preset View mode by pressing the preset button in the Mode/
1.
View section immediately below the LCD.
Select a preset by turning the data entry control while the cursor is
2.
anywhere on the lower line. The preset number field (shown above) is
the normal position of the cursor and pressing the Enter button will
return the cursor to this position.
Press the Audition button on the front panel. The Audition LED will
3.
illuminate and a short riff will play the selected preset.
Continue to select and audition presets.
4.
Press the Audition button again to turn Audition mode off. The LED
5.
will extinguish.
Play the rubber keypads.
6.
Be sure to check out the transposition buttons and touchstrip.
7.
The first thing you'll do with the MP-7 is select and play the factory
provided presets. MP-7 comes standard with 8 banks containing 128 presets
each. See "Preset Screen" on page 44.
Channel Volume
Number Setting
C01A
2
125
Blinking Preset
Cursor Number
The first four banks are USER locations that can be overwritten and used to
store your own presets. The presets that come stored in the USER presets are
duplicated in banks 0-3 of the "MP-7" ROM bank, so feel free to overwrite
them with your own presets. You won't be losing anything.

Selecting and Quick Editing Presets

MSB:015 LSB:2
key: SynhissOrgan
Initial Initial
Pan Arpeggiator
Setting Setting
V127 P01 A:off
R
key: SynhissOrgan
Bank Preset
Number
Category
Instant Gratification
MP-7
Preset
Location
User
Preset
Name
MP-7 Owners Manual 25