Advertisement
Oven Vent and Racks
REMOVING,
REPLACING, AND ARRANGING
GLIDE
RACKS
The glide rack is an extendable
rack that maizes food
preparation
easier. It has glide tracks that allow the rack to
be pulled away from the oven without
rubbing
the sides of
the oven wall.
Removing
and replacing
the gllde racks
To remove
the glide rack:
1. Lift up on the release lever located
across the lower front
of the rack° as shown in figure 1.
2. While
holding
up the release lever (see figure 2), puii
the glide rack out of the oven until the stop position
is
reached,
use two hands if necessary.
3. Using both hands, grasp the upper and lower portions
of
the glide rack
(see
figure 3).
4. Lift up the front of the rack slightly
and continue to puil
the rack away from the oven.
5. Be sure to grasp both upper
and lower rack portions
together when removing
or handling
the glide rack. The
rack portions
move independently
and are difficult
to
handle unless held together.
To replace
the gllde rack:
1. Grasp both upper and lower portions
of the glide rack
(see
figure
3).
2. Lift and hold the rack level between
the oven cavity walls.
3. Tilt the front of the rack upward
slightly
and slide the rack
completely
into position.
Some force may be necessary
to
maize sure the oven rack has snapped
into place.
Figure I - Extendable
glide rack with release lever in
locked
position
Figure 2 - Extendable
glide rack with release lever in
unlocked
position
Figure 3 - Removing and replacing
the oven glide rack.
13
Advertisement
