Table of Contents
Advertisement
Figure 1: VP-441 Presentation Switcher/Scaler Front Panel
#
Feature
1
POWER Switch
2
IR Receiver
3
INPUT
CV
SELECTOR
4
YC
Buttons
5
COMPONENT
6
VGA
7
HDMI
8
BLANK Button
MUTE Button
9
10
FREEZE Button
11
MENU Button
12
ENTER Button
- Button
13
Button
14
+ Button
15
Button
16
17
PANEL LOCK Button
18
RESET TO XGA/720p Button
Illuminated switch for turning the unit ON or OFF
Receives signals from the remote control transmitter
Press to select the composite video input
Press to select the s-Video input
Press to select the component video input (from 1 to 2)
Press to select the computer video graphics input
Press to select the HDMI input (from 1 to 2)
Press to toggle between a blank screen (blue or black screen) and the display
Press to toggle between muting (blocking out the sound) and enabling the audio output
The FREEZE button can be programmed to follow MUTE (see
Press to freeze/unfreeze the output video image
This button can be programmed to follow MUTE (see
Section 6 2
Displays the OSD menu (see
Press to accept changes, change the SETUP parameters (see
not within the OSD menu), see
Section
Press to decrease numerical values or select from several definitions.
For convenience and speed—when not within the OSD menu mode—press to reduce volume
Press to move up the menu list values (see
Press to increase numerical values or select from several definitions.
For convenience and speed—when not within the OSD menu mode—press to increase volume
Press to move down the menu list (see
Press and hold for about 2 seconds to lock/unlock the front panel buttons
Press to reset the video resolution to XGA or 720p
Press and hold for about 2 seconds to reset to XGA; or press and hold for about 5 seconds to reset to 720p
Function
Section 6 2.3
6 2.3
Section
)
)
Section
6.2) and to auto adjust the image (when
6.1.1
Section 6.2
)
Section 6.2
)
)
Advertisement
Table of Contents
