im Vertrieb von
Figure 1: VP-436N Presentation Switcher/Scaler Front Panel
#
Feature
1
POWER Switch
2
IR Receiver
3
INPUT
Selector
4
Buttons
5
6
7
8
BLANK Button
9
MUTE Button
10
FREEZE Button
11
MENU Button
12
ENTER Button
- Button
13
Button
14
+ Button
15
Button
16
17
PANEL LOCK Button
18
RESET TO XGA/720P
Button
www.camboard.de
CAMBOARD Electronics
Function
Illuminated switch for turning the unit ON or OFF
Accepts IR remote commands
CV
Press to select the composite video input
YC
Press to select the s-Video input
COMPONENT Press to select the component video input (from 1 to 2)
VGA
Press to select the computer graphics input
HDMI
Press to select the HDMI input (from 1 to 2)
Press to toggle between a blank screen (blue or black screen) and the display (can be programmed to follow MUTE)
Press to toggle between muting (blocking out the sound) and enabling the audio output (see
Press to freeze/unfreeze the output video image (Can be programmed to follow MUTE)
Displays the OSD menu (see
Press to accept changes, change the SETUP parameters (see
menu), see
Section 6.1.1
Press to decrease numerical values or select from several definitions.
When not within the OSD menu mode, press to reduce volume (for embedded HDMI inputs, this does not affect the embedded output)
Press to move up the menu list values (see
Press to increase numerical values or select from several definitions.
When not within the OSD menu mode, press to increase volume (for embedded HDMI inputs, this does not affect the embedded output)
Press to move down the menu list (see
Press and hold for about 2 seconds to lock/unlock the front panel buttons
Press to reset the video resolution to XGA or 720p
Press and hold for about 2 seconds to toggle between reset to XGA and reset to 720p
Tel. 07131 911201
Fax 07131 911203
Section
6.2)
Section
6.2) and to auto adjust the image (when not within the OSD
Section
6.2)
Section
6.2)
Section
6.2.3)
ce-info@camboard.de
Need help?
Do you have a question about the VP-436N and is the answer not in the manual?