Table of Contents
Advertisement
6.2.4
The OSD Menu
Parameter
H POSITION
V POSITION
T MER
BACKGROUND
DISPLAY
6.3
Connecting to the VP-441 via RS-232
You can connect to the VP-441 via an RS-232 connection using, for example, a PC.
Note that a null-modem adapter/connection is not required.
To connect to the VP-441 via RS-232:
•
Connect the RS-232 9-pin D-sub rear panel port on the VP-441 unit via a
9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and pin 5 to pin 5 need
to be connected) to the RS-232 9-pin D-sub port on your PC
6.4
Connecting the VP-441 via the ETHERNET Port
To connect and configure the Ethernet port of the VP-441, refer to the ETHERNET
Configuration (Lantronix) GUIDE on our Web site:
http://www.kramerelectronics.com
14
Set the horizontal position of he OSD (from 0 to 100)
Set the vertical position of the OSD (from 0 to 100)
Set the timeout period in seconds (from 5 to 100)
Set the OSD background between 0 (solid black) and 8 (transparent)
Select the information shown on the screen during operation:
ON - the information is shown permanently
OFF - the informa ion is not shown
INFO - the information is shown for a few seconds
Function
VP-441 - Controlling the VP-441
Advertisement
Table of Contents
