Table 1: Vp-437Xl Presentation Switcher / Scaler Front Panel Features - Kramer VP-437xl User Manual

Table 1: VP-437xl Presentation Switcher / Scaler Front Panel Features

# Feature
1 POWER Switch
2 IR Receiver
3 CV
4 YC
5 COMPONENT
6 VGA
7 HDMI
8 BLANK Button
9 MUTE Button
10 FREEZE Button
11 MENU Button
12 ENTER Button
13 -  Button
14  Button
15 +  Button
16  Button
17 PANEL LOCK Button
18 RESET TO XGA/720p
Button
1 Can be programmed to follow MUTE (see section 7.2.3)
2 See section 7.2
3 For about 2 seconds
4 Press and hold for about 2 seconds to reset to XGA; or press and hold for about 5 seconds to reset to 720p
Your VP-437xl Presentation Switcher / Scaler
Illuminated switch for turning the unit ON or OFF
Receives signals from the remote control transmitter
Press to select the composite video input
Press to select the s-Video input
Press to select the component video input (from 1 to 2)
Press to select the computer graphics input
Press to select the HDMI input (from 1 to 2)
Press to toggle between a blank screen (blue or black screen) and
1
the display
Press to toggle between muting (blocking out the sound) and
enabling the audio output
Press to freeze/unfreeze the output video image
Displays the OSD menu (see section 7.2)
Press to accept changes, change the SETUP parameters
auto adjust the image (when not within the OSD menu), see section
7.1.1
Press to decrease numerical values or select from several definitions.
For convenience and speed—when not within the OSD menu
mode—press to reduce volume
Press to move up the menu list values
Press to increase numerical values or select from several definitions.
For convenience and speed—when not within the OSD menu
mode—press to increase volume
Press to move down the menu list
Press and hold
Press to reset the video resolution to XGA or 720p
Function
2
2
3
to lock/unlock the front panel buttons
1
2
and to
4
7