EPL-5700L/5700i
4.2.3 Main Control Board Removal
1. Remove the right cover (See section 4.2.2 of the EPL-5700 Service
Manual).
2. Remove the control panel (See section 4.2.1 of this manual).
3. Remove the front cover (See section 4.2.7 of the EPL-5700 Service
Manual).
4. Remove 10 screws (CS M3x8) securing the shield cover of the Main
Control Board, and remove the shield cover (See section 4.2.9 of
the EPL-5700 Service Manual).
5. Remove the harnesses which are connected to the connector on the
Main Control Board.
6. Remove 10 screws (CS M3x8) securing the Main Control Board on
the printer (See section 4.2.9 of the EPL-5700 Service Manual).
DISASSEMBLY AND ASSEMBLY
7. Remove a fixing screw for USB interface (CS M3x6) and two fixing
screws for parallel interface (CP M3x6), and remove the board.
Main Board Fixing Screws
DISASSEMBLY AND ASSEMBLY
USB Connector Fixing Screw
Figure 4-5. Main Control Board Removal
Revision A
Parallel
Connector
Fixing
Screws
33