Table of Contents
Advertisement
1.4) Operating
machine
Warning
1.5) Safety devices
Caution
KM-360J series were designed as industrial sewing machines to conduct bottom hemming on
fabric and similar materials. Observe the following instructions during machine operation.
ⓐ Read through this manual carefully and completely before operating the machine.
ⓑ Wear proper clothes for work.
ⓒ Keep hands or other parts of the body away from the machine's operation parts(needle,
shuttle, thread take-up lever, pulley, etc.) when the machine is operating.
ⓓ Keep the covers and finger guard on the machine during operation.
ⓔ Be sure to connect the earthing conductor.
ⓕ Turn off the main power and check if the switch is turned "off" before opening electric
boxes such as the control box.
ⓖ Stop the machine before threading the needle or checking after work.
ⓗ Do not step on the pedal when turning the power on.
ⓘ If possible, install the machine away from source of strong electrical noise such as high
frequency welding machines
[ Warning ]
Keep motor cover in place before operating, turn off power before inspecting or
adjusting.
ⓐ Safety label : It describes cautions during the machine operation.
ⓑ Thread take-up cover : It prevents any contact between body and take-up lever.
ⓒ Motor cover : A device to prevent hands, feet and clothing from getting jammed by the
motor.
ⓓ Label for specification of power : It describes cautions for safety to protect electric shock
during the motors' rotation. (Voltage input / use Hz)
ⓔ Finger guard : It prevent contacts between finger and needle.
ⓕ, ⓖ Gear covers (left), (right) : They prevent fingers from contacting the conversion gear.
ⓔ
ⓐ
ⓕ
ⓑ
ⓒ
ⓖ
ⓓ
7
Advertisement
Table of Contents
