SunStar KM-360J SERIES User Manual page 14

C. Install the thread stand ② on the table ①.
D. Hammer the head supporting stick ③ into the table.
Make sure the head supporting stick completely inserted into the table.
Otherwise, when the sewing machine head is pushed backward, it is not stable and dangerous.
Caution
E. Install the lap switch ① beneath the table, and fix it with
a nail ② (KM-360J-7E(M)).
F. Fix the manifolder bracket ① beneath the table and fix it
using a screw ② (KM-360J-7E(M)).
14
②
②
③
①
[Fig. 8]
②
①
[Fig. 9]
①
[Fig. 10]