Table Of Contents - SunStar KM-360J SERIES User Manual

Contents
1. Machine safety regulations
2. Machine Specifications
3. Machine Parts
4. Machine Installation
5. Preparation Before Use
6. Maintenance
1.1) Transporting machine ---------------------------------------------------------------------------- 6
1.2) Installing machine --------------------------------------------------------------------------------- 6
1.3) Repairing machine -------------------------------------------------------------------------------- 6
1.4) Operating machine ------------------------------------------------------------------------------- 7
1.5) Safety devices ------------------------------------------------------------------------------------- 7
1.6) Caution mark position ---------------------------------------------------------------------------- 8
1-7) Contents of marks -------------------------------------------------------------------------------- 8
---------------------------------------------------------------------------------------
3.1) Parts Name --------------------------------------------------------------------------------------- 10
------------------------------------------------------------------------------
4.1) Installation Environment ---------------------------------------------------------------------- 11
4.2) Electricity Environment ------------------------------------------------------------------------- 11
4.3) Machine Placement on the Table ----------------------------------------------------------- 12
4.4) Part Assembly ------------------------------------------------------------------------------------ 13
5.1) Oil Supply ------------------------------------------------------------------------------------------ 15
5.2) Needle Installation ------------------------------------------------------------------------------ 15
5.3) Lower Thread Placement --------------------------------------------------------------------- 15
5.4) Bobbin Case Insertion and Disposal ------------------------------------------------------- 16
5.5) Lower Thread Winding ------------------------------------------------------------------------- 16
5.6) Upper Thread Tension Adjustment --------------------------------------------------------- 17
5.7) Remaining Thread Adjustment After Trimming ------------------------------------------ 18
5.8) Upper Thread Placement --------------------------------------------------------------------- 18
5.9) Pressured Air Input and Air Pressure Adjustment (KM-360J-7E(M)) -------------- 18
------------------------------------------------------------------------------------------
6.1) Needle Bar Height Adjustment -------------------------------------------------------------- 20
6.2) Needle, Hook Timing Adjustment ----------------------------------------------------------- 20
6.3) Adjustment of Thread Take-up Lever Lubrication -------------------------------------- 20
---------------------------------------------------------------------
---------------------------------------------------------------------------
-------------------------------------------------------------------------
6
9
10
11
15
20