E. Install the motor and fully loosen the fixing nuts ①, ②.
Then, tension is generated around the belt ④ due to the
weight of the motor ③. Fasten the fixing nut ① first and
tightly fasten the fixing nut ② (KM-360-M).
4.4) Part Assembly
A. Attach the motor cover ① to the rear side of the machine using the fixing screw ② (However, in case of manual
trimming type, attach the belt cover (A)①, (B)② to the rear side of the machine using the fixing screw③).
KM-360J-7E
KM-360J-7M
B. Assemble the operating panel ① to the bracket ②, and
attach them to the rear side of the machine (KM-360J-
7M).
KM-360J-M
②
①
[Fig. 5]
②
②
①
③
②
①
①
④
③
[Fig. 4]
[Fig. 6]
[Fig. 7]
13