Operating Machine; Safety Devices - SunStar SC 8200J Series User Manual

4) Operating
machine
Warning

5) Safety devices

Caution
SC8200 Series are designed as industrial sewing machines performing sewing on denim and
other similar materials. Please observe the following instructions during the machine operation.
ⓐ Read through this manual carefully and completely before operating the machine.
ⓑ Wear proper clothes for work.
ⓒ When the machine is in operation, do not bring your hands or body near the moving parts
of the machine, such as needle, looper, spreader, thread take-up lever and pulley, etc.
ⓓ Keep the covers and safety plates in place during operation.
ⓔ Be sure to connect the earthing conductor.
ⓕ Turn off the main power and check if the switch is turned "off"before opening electric
boxes such as the control box.
ⓖ Stop the machine before threading the needle or checking after work.
ⓗ Do not step on the pedal when turning the power on.
ⓘ Do not operate the machine with any cooling fan blocked.
The air-filter on control box must be cleaned once a week.
ⓙ If possible, install the machine away from source of strong electrical noise such as high
frequency welding machines
[ Warning ]
Keep cover in place before operating, turn off power before inspecting or adjusting in order
to prevent physical injury from belt.
ⓐ Safety label : Things to be kept in mind during operation are described.
ⓑ Thread take-up lever cover : Prevents the contact between a body part and the thread take-
up lever
ⓒ Safety plate : Prevents the contact between needles and fingers.
ⓓ Motor cover : Prevents any potential accidents from occurring while a motor is in
operation.
ⓑ
ⓒ
ⓓ
ⓐ
7