Tray Settings - Oki mc760x User Manual

PRINTING FROM WINDOWS
Update Automatically
Select this check box to update the option configuration
information automatically every time you open the [Device
Settings] tab.
1
[Update Now]
Click this to obtain the configuration information from this
equipment immediately.
Memo
• If the connection to the equipment has not been
configured correctly, the message "The address of your
2 machine could not be located. Would you like to find it?"
will be displayed when you click [Update Now]. If it is
displayed, click [Yes] and search for the equipment
using the [Local Discovery] dialog box. After searching
for the equipment, SNMP communication will be
enabled. For the instructions on how to search for the
equipment, refer to the instructions of
TopAccessDocMon.
3
Note
• If you disable SNMP Communication,
TopAccessDocMon notification also will be disabled.
9) [Restore Defaults]
Click this to restore the configuration of this equipment
displayed in the [Device Settings] tab menu to the original
factory defaults.
4

Tray Settings

1
5
4
5
6
1) Paper Size
Select the paper size set in each tray.
2) Paper Type
Select the paper type set in each tray.
3) Attribute
Select the attribute of the paper. When you set the attribute,
the tray will be selected preferentially according to the print
7
settings.
4) Override Application Paper Source Settings
Select this check box to use the paper source setting in the
printer driver rather than the application setting.
5) [Restore Defaults]
Click this to restore the settings displayed in the [Tray
Settings] dialog box to the original factory defaults.
Memo
• Trays selectable differ depending on the option
configuration.
Account Settings
1
2
3
4
5
6
7
Memo
• When SNMP communication is enabled, the following
account information is automatically obtained from the
equipment.
2
1) User Authentication
3
Select the authentication method which is to be used. Set it
to correspond to that of your MFP.
- Off — Select this not to perform user authentication.
- MFP Local Authentication — Select this to perform
MFP Local Authentication.
- Windows Domain Authentication — Select this to
perform Windows Domain Authentication.
- LDAP Authentication — Select this to perform LDAP
Authentication.
2) Enter the user credentials manually
When this check box is selected, you are prompted to enter
your user name and password every time you print a
document. This option is available when any of MFP Local
Authentication, Windows Domain Authentication, or LDAP
Authentication is selected in the [User Authentication] box.
Memo
• This option can be used together with any of the user
authentication functions (MFP Local Authentication,
Windows Domain Authentication, LDAP Authentication).
3) User Name
The user name that is entered to log in to your computer is
displayed.
4) Domain Name
The domain name on which the equipment belongs is
displayed.
- 33 -