Setting The Tcp/Ip Protocol (Ipv6) - Oki mc760x User Manual

Setting the TCP/IP protocol (IPv6)

You can set the TCP/IP v6 protocol.
In IPv6 setting operation, you can enable or disable the IPv6
protocol in this equipment, as well as set the IPv6 address, for
example, by selecting the addressing mode.
How the IPv6 address is acquired depends on the addressing
mode you select.
• When you select [MANUAL]:
You assign the IPv6 address, prefix and default gateway
manually. In this mode, it is possible to register one IPv6
address.
 P.270 "Setting the IPv6 protocol manually"
• When you select [STATELESS]:
The IPv6 address is acquired automatically from the
DHCPv6 server and routers. In this mode, it is possible to
register up to nine IPv6 addresses.
P.271 "Setting the IPv6 protocol automatically (in a

stateless network environment)"
Memo
• Up to seven IPv6 addresses can be acquired from
routers. One IPv6 address can be obtained from the
DHCPv6 server. And, one link-local address is
generated automatically.
• When you select [STATEFUL]:
The IPv6 address is automatically acquired from the
DHCPv6 server. In this mode, it is possible to register one
IPv6 address.
 P.273 "Setting the IPv6 protocol automatically (in a
stateful network environment)"
Memo
• If Duplicate Address Detection (DAD) detects duplicate
addresses, the message "IPv6 ADDRESS CONFLICT"
is displayed on the touch panel.
Setting the IPv6 protocol manually
1
On the IPv6 screen, specify the following
items as required and press
Item name
IPv6 PROTOCOL
LLMNR
ADDRESS MODE Select [MANUAL] for the IPv6
Link Local
Address
Note
• The link-local address cannot be used to connect to
network places across a router.
• [ENABLE] and [DISABLE] for the LLMNR protocol are
available when you select [ENABLE] for the IPv6
protocol.
- 270 -
SETTING ITEMS (ADMIN)
.
Description
• ENABLE — Press this button
to enable the IPv6 protocol.
• DISABLE — Press this button
to disable the IPv6 protocol.
• ENABLE — Press [ENABLE]
to enable the LLMNR
(Linklocal Multicast Name
Resolution) protocol.
• DISABLE — Press [DISABLE]
to disable the LLMNR protocol.
addressing mode.
The unique address used in IPv6
is displayed.
1
2
3
4
5
6
7