Table of Contents
Advertisement
●
OTHER SCANNING METHODS
Scanning Images Using the Remote
Scan Driver
One of the scan drivers included with the software DVD-ROM
is the Remote Scan driver. With this driver, you can perform
scanning operations remotely from your Windows computer
over the TCP/IP network. Your scans can be loaded to your
Windows computer running a TWAIN-compliant application.
Connecting over TCP/IP Network
Originals
Scan originals remotely using the
Remote Scan driver
Import your scans to a
TWAIN-compliant application
The the software DVD-ROM also includes the WIA Driver for
users of Windows XP/Windows Vista/Windows 7/Windows 8/
Windows Server 2003/Windows Server 2008/Windows Server
2012. This driver can be used together with a WIA-compliant
application, such as Microsoft Paint supported by Windows XP
or Windows Vista, to scan images on the equipment and load
them to your client computer.
• If only the Department Management features are enabled,
Windows XP
Windows Vista
Windows 7
Windows 8
Windows Server 2003
Windows Server 2008
Windows Server 2012
For instructions on how to scan and acquire images to your
computer, refer to the documentation that comes with your
WIA-compliant application.
• If you are using Windows XP or Windows Server 2003,
- 196 -
Scanning Images Using the WIA
Driver
Note
the department code needs to be entered.
Connecting over TCP/IP Network
Originals
Scan originals using the WIA Driver
Import your scans to a
WIA-compliant application
Note
follow the procedure below to register this equipment to the
WIA Driver after the installation of the driver.
1. Double-click [Scanners and Cameras] of [Control
Panel].
2. Right-click [WIA] and then click [Properties].
3. Click [Discover] on the [Device Setting] tab menu.
4. Click [Start Discovery].
5. Select this equipment and then click [OK].
6. Click [OK].
OTHER SCANNING METHODS
Windows XP
Windows Vista
Windows 7
Windows 8
Windows Server 2003
Windows Server 2008
Windows Server 2012
1
2
3
4
5
6
7
Advertisement
Table of Contents
