Full Image; Omit Blank Page - Oki mc760x User Manual

EDITING FUNCTIONS

Full Image

1
You can copy the entire image of an original including any fine
text at its edge. This function is called "full image". With this
function, the image will be copied with its reproduction ratio
reduced by approx. 1 to 5%.
1
Place paper in the tray(s).
2
Place the original(s).
3
Press [ZOOM] on the touch panel.
2
3
4
Select sizes for the original and copy paper.
1) Select the original size.
2) Select the paper size.
4
3) Press [OK].
5
The menu returns to the BASIC menu.
5
Press [FULL IMAGE] on the EDIT menu.
6
7
6
Select other copy modes as required, and
then press the [START] button on the
control panel.

Omit Blank Page

You can remove blank sheets included in the scanned originals
before copying is started. This function is called "omit blank
page".
1
5
Note
• This function may not properly detect blank sheets included
in the following types of originals:
- Half-tone originals
- Originals including sheets almost blank (e.g. blank pages
having only page numbers)
• If you copy 2-sided originals including blank sheets to 2-
sided copy while this function is enabled, the front and back
sides of the originals and the copies will not match.
Memo
• The sensitivity to detect blank pages can be changed. For
details, refer to the "Setting Items/Printing" ( P.228).
1
Place paper in the tray(s).
When using bypass copying, be sure to set the paper
size.
2
Place the original(s).
3
Press [OMIT BLANK PAGE] on the EDIT
menu.
- 103 -
3 1
6 5
3
6