Comparing pre and post-correction images
Clicking the comparison display button divides the image display area in two. The
original image is on the left and the corrected image is on the right. To display the
corrected image only, click the comparison display button again.
Original image
Changes made with the magnifying tool, grab tool, or scroll bars on one image will be
applies to the other. Using the fit-to-window button automatically resizes both images
to fit the display area.
Undoing and redoing image corrections
The undo, redo, and reset-all buttons only affect tools used in the image-correction tab.
They have no effect with the Digital ICE
Click the undo button to cancel the last image correction applied to the
image. The number of image corrections that can be undone depends on
the computer memory capacity.
Click the redo button to reapply the last image correction canceled with
the undo button.
Click the reset-all button to cancel all image corrections applied to the
image.
28
B
ASIC IMAGE PROCESSING
Corrected image
3
functions.
Grain Dissolver
This function is not available with all scanner models, see the scanner notes section
in the hardware manual. The Grain Dissolver uses a diffusion plate in front of the light
source to optically minimize the effect of grain. The Grain Dissolver automatically
activates with Digital ICE when both functions are available.
How much the image is affected depends on the scanner resolution and film, film
density, and image detail and can only be seen in the final scan. The Grain Dissolver
increases scanning time. Contrast and sharpness may be affected. The use of
autofocus or manual focus is recommended.
Click the Grain Dissolver button in the main window to activate the function.
Quitting the DiMAGE Scan Utility
To close the DiMAGE Scan Utility, simply
click the close button in the top right corner
of the main window.
29