Quitting The Standard Scan Utility - Minolta Dimage Scan Elite II Instruction Manual

QUITTING THE STANDARD SCAN UTILITY

To turn off the scanner at the end of a scanning session, following steps 1 through 4. To restart the
computer, following steps 1 through 3.
1 Quit the Standard Scan Utility software or close Photoshop Elements.
2 Press the eject button to unload the film holder or APS adaptor.
• The scanner automatically ejects the 35mm film or slide mount holder to the initial inserting
position. Do not touch or hinder the holder while it is moving.
• When using the optional APS Adaptor, the scanner automatically rewinds the film when the
eject button is pressed. Do not remove the adaptor until
the rewind motor has stopped.
3 Close the front door.
4 Press the main switch to turn off the scan-
ner.
• Unplug the scanner when cleaning or when the product
is not in use for extended periods.
• When using the IEEE 1394 cable with Windows Me, com-
plete the "Unplug or eject hardware" operation by double-
click on the "Unplug or eject hardware" icon on the task
bar before turning off the scanner (see page 87). This
step is unnecessary if the computer is shutdown before
turning off the scanner.
85