Table of Contents
Advertisement
30
Connecting Components
Adding a secondary CPU module
Reinstall he side panel and bezel. For instructions, see
7
"Removing and installing the bezel and side panel" on
page 24.
8
Plug in the power cable, then press the Power button to turn
on the server.
During system boot up, press the
9
Setup Utility.
10 In the Chipset features Setup of the System Setup Utility, set
the following parameters:
11 Save the changed values, then restart the server.
12 Follow the on-screen messages to confirm that the server
recognizes the installed CPU module.
HINT: When the server detects both CPU modules correctly,
two lines of CPU information appear on screen.
13 Reinstall the operating system.
Replacing a CPU module
TECHNICAL NOTE: All CPU modules used in multi-CPU
server configurations must operate at the same clock speed
(frequency) and have the same cache size.
CPU2 Fan Control - Enabled
CPU2 Fan Fail Alarm - Enabled
key to start the System
Del
Advertisement
Table of Contents
