44
Connecting Components
Adding a SCSI hard disk drive
11 After the partition is established, go to the menu bar and select
Partition, then Commit Changes Now.
12 Follow the screen prompts to confirm the setup.
The disk partition is created.
13 When the partition is completed, go to the menu bar and
select Tools, then Format.
14 From the Format page, make the proper selections for your
environment, then click Start.
15 Follow the screen prompts to complete this process, then Exit
the utility.
The new disk is now ready for use.
Adding a SCSI hard disk drive
Specific technical knowledge is required to install or replace a
hard disk drive (HDD). If you are not sure how to proceed,
Toshiba recommends that you ask your authorized service
provider to install or replace HDDs.
CAUTION: Take care when handling hard disk drives. Avoid
subjecting the hard disk drive to shock or vibration. The disk
could be damaged and its data destroyed.