Table of Contents
Advertisement
Option: 01.Print Ripple pattern
This subtest prints characters for codes 20h through 7Eh line-by-
line while shifting one character to the left at the beginning of each
new line.
SCSI HDD Test
TECHNICAL NOTE: If IDE hard disk drives are connected to
the server, this menu is not available and is grayed out.
To execute the SCSI HDD Test, select 6 from the DIAGNOSTIC
TEST MENU, press
The SCSI disk test contains two subtests that test the hard disk
drive functions.
This test checks the HDD functions for drives connected to the
SCSI-Bus through ASPI driver software. Before running the tests,
you must designate the items for testing.
Host ID Number
This option sets the target host adapter number. When you
choose ALL, the subtest tests all disks connected to the
server, and the next options, SCSI ID and CHANNEL
number will be ignored.
SCSI ID NUMBER
This option sets the SCSI ID to test. You can specify just one
ID to test except ID:7.
CHANNEL NUMBER
If the server has multiple SCSI channels, this option sets the
channel number to test.
This test only runs if you have hard drives assigned. Use
appropriate testing for CD-ROMs and tape drives. This program
If Something Goes Wrong
Hardware Diagnostic Program
, and follow the directions on the screen.
Enter
123
Advertisement
Table of Contents
