Table of Contents
Advertisement
CAUTION: To avoid deforming the CPU module's heatsink,
don't apply pressure to the heatsink while installing the CPU
module.
6
Connect the fan cable attached to the new CPU module to the
appropriate connector system board.
If you are replacing the primary CPU module, connect
the fan cable to connector FAN PRW1 on the system
board.
If you are replacing the secondary CPU module, connect
the fan cable to connector FAN PRW2 on the system
board.
HINT: The primary CPU module resides in the left CPU slot.
The secondary CPU module installs in the right CPU slot.
7
Reinstall the side panel and bezel. For instructions, see
"Removing and installing the bezel and side panel" on
page 24.
8
Plug in the power cable, then press the Power button to turn
on the server.
9
Follow the on-screen messages to confirm that the server
recognizes the installed CPU module.
HINT: When the server detects both CPU modules correctly,
two lines of CPU information appear on screen.
Connecting Components
Adding a secondary CPU module
33
Advertisement
Table of Contents
