Hot-Plug Fans - HP ProLiant DL380 Gen9 Server User Manual

Item LED

Hot-plug fans

CAUTION:
and 2 in a single-processor configuration.
CAUTION:
of time if the server does not have the optimal number of fans installed. Although the server might
boot, HP does not recommend operating the server without the required fans installed and
operating.
Valid fan configurations are listed in the following table.
Configuration
1 processor
1 processor, 24 SFF or
12 LFF configuration with
high performance fans
2 processors
Status Definition
Flashing green The drive is rebuilding or performing a RAID migration, strip size
migration, capacity expansion, or logical drive extension, or is
erasing.
Flashing The drive is a member of one or more logical drives and predicts
amber/green the drive will fail.
Flashing amber The drive is not configured and predicts the drive will fail.
Solid amber The drive has failed.
Off The drive is not configured by a RAID controller.
To avoid damage to server components, fan blanks must be installed in fan bays 1
To avoid damage to the equipment, do not operate the server for extended periods
Fan bay 1 Fan bay 2 Fan bay 3
Fan blank Fan blank
Fan Fan
Fan Fan
Fan bay 4 Fan bay 5 Fan bay 6
Fan Fan
Fan Fan
Fan Fan
Fan Fan
Fan Fan
Fan Fan
Component identification 22