Nvme Ssd Components; Hot-Plug Fans - HP ProLiant DL360 Gen9 User Manual

NVMe SSD components

The NVMe SSD is a PCIe bus device. A device attached to a PCIe bus cannot be removed without
allowing the device and bus to complete and cease the signal/traffic flow.
CAUTION: Do not remove an NVMe SSD from the drive bay while the Do Not Remove
button LED is flashing. The Do Not Remove button LED flashes to indicate the device is still in
use. Removal of the NVMe SSD before the device has completed and ceased signal/traffic
flow can cause loss of data.
Item
1
2
3
4

Hot-plug fans

CAUTION: To avoid damage to server components, fan blanks must be installed in fan bays
1 and 2 in a single-processor configuration.
The only two valid fan configurations are listed in the following table.
Configuration
1 processor
2 processors
Description
Release lever
Activity ring
Do Not Remove button
Power button
Fan bay 1 Fan bay 2 Fan bay 3
Fan blank Fan blank
Fan Fan
Fan bay 4 Fan bay 5 Fan bay 6
Fan Fan
Fan Fan
Fan Fan
Fan Fan
Component identification 19
Fan bay 7
Fan
Fan