Cleaning T He B Rake B And A Nd S Procket G Uard; Cleaning T He G Uide B Ar - Makita EA3200S Operator's Manual

Cleaning t he i nside o f t he s procket g uard
CAUTION: Before doing any work on the guide bar or
chain, always switch off the engine and pull the plug
cap off the spark plug (see " Replacing the spark plug").
Always w ear p rotective g loves!
CAUTION: Start the chain saw only after having as-­
sembled i t c ompletely a nd i nspected.
Remove the sprocket guard (1) (see PUTTING INTO OP-­
ERATION for the correct model) and clean out the interior
with a brush.
Remove the chain (2) a nd g uide b ar ( 3).
NOTE:
Make sure there are no residues or foreign matter remaining
in the oil guide groove (4) or on the chain tensioner (5).
To install the guide bar, saw chain, and sprocket guard, see
PUTTING INTO OPERATION for the correct model.
NOTE:
The c hain b rake i s a v ery i mportant s afety d evice a nd
like a ny o ther c omponent s ubject t o n ormal w ear a nd
tear.
Regular i nspection a nd m aintenance a re i mportant f or
your o wn s afety a nd m ust b e d one b y a M AKITA s ervice
center.
SERVICE
Cleaning t he g uide b ar
CAUTION: P rotective g loves m ust b e w orn.
Regularly i nspect t he b earing s urfaces o f t he g uide b ar ( 7)
for d amage, a nd c lean t hem w ith a s uitable t ool.
Keep the two oiling holes (6) and the entire guide bar clean
and free of foreign matter!
36