A.5 Power Requirements - Christie CP4220 User Manual

A.5 Power Requirements

A.5.1 AC Input
Voltage Range
Line Frequency
Inrush Current
Current Consumption
Power Consumption
Current Rating of AC Input
A.5.2 UPS AC Input
Voltage Range
Line Frequency
Inrush Current
Current Consumption
Power Consumption
Current Rating of AC input
A.6 Lamp
Type:
Power (software adjustable):
CDXL-20
CDXL-30
CDXL-30SD
NOTES: 1) The LPS is power regulated. Therefore the maximum power specification for a given lamp may
not be achievable until the lamp has aged, since lamp voltage increases with hours of use. 2) The maximum
power of the LPS is restricted to 3000W ± 100W.
Average Life:
CDXL-20
CDXL-30
CDXL-30SD
Wait time between lamp strikes
Warm-up time to full brightness
NOTE: Hot re-strikes reduce lamp life.
Other lamps with bulb diameters not exceeding 70mm may also be used, however the projector may not meet
its specified light output rating. Such lamps include the following:
CXL-30
CP4220 User Manual
020-100690-02 Rev. 1 (01-2012)
200 - 240 VAC
50Hz - 60Hz nominal
45 A maximum (LVPS or LPS)
23 A maximum (at 200 VAC)
4500 W maximum
30 A maximum (Specified Wall Breaker)
100 - 240 VAC
50Hz - 60Hz nominal
50 A maximum
10 A maximum
1000 W maximum
15 A maximum (Specified Wall Breaker)
Xenon bubble
1000W min., 2000W nom., 2200W max.
1000W min., 3000W nom., 3100W max.
1000W min., 3000W nom., 3100W max.
3500 hours
2500 hours
2000 hours at 2.5kW / 1100 hours at 3 kW
2 minutes min.
20 minutes max.
(3.0kW Xenolite® bulb)
Appendix A: Specifications
A-7