Christie CP4220 User Manual page 170

Appendix B: Serial API
SNMP Agent Configuration (SNM) (Continued)
Gets/sets the Lamp Half Life Trap Flag for the SNMP Agent
LHLT
Sets the Trap IP address for the SNMP agent
TSIP
EXAMPLES:
(SNM+TSIP "xxx.xxx.xxx.xxx") Sets the Trap IP address to xxx.xxx.xxx.xxx
(SNM+TSIP "0.0.0.0") Setting the IP address to 0.0.0.0 will stop SNMP Agent from sending the traps.
(SNM+LHLT 1) Setting this flag to 1 will disable any future lamp half life traps
(SNM+LEXT 1) Setting this flag to 1 will disable any future lamp expire traps
(SNM+ENVT ?) Get the flag to see if V2 is enabled (1) or disabled (0)
(SNM+ENVT 1) Enable SNMP V2
(SNM+ENVT 0) Disable SNMP V2
Screen Orientation (SOR)
Set screen orientation. This allows for flipping the screen orientation to allow for various mounting options of the
projector including the use of mirrors and front or rear screen projection.
SUBCODE DESCRIPTION OF USE
Select Orientation:
NONE
0 - Normal Front,
1 - Inverted Rear,
2 - Normal Rear,
3- Inverted Front
EXAMPLES:
(SOR?L) List orientation options
(SOR?) Get the orientation status
(SOR0) Set orientation to front
Select Source Format (SRF)
elect the Source format file.
S
SUBCODE DESCRIPTION OF USE
Replace xxx with the channel number. Valid range is 101 - 164.
Cxxx
Select source format for the current channel.
NONE
EXAMPLES:
(SRF+C108 "XXX") Use file "XXX" on channel 108
(SRF+C108?) Get source file name on channel 108
(SRF?L) List all entries of source control
(SRF+RFSH 1) Refresh TI file list
System Status (SST)
etrieve the various system status groups.
R
SUBCODE DESCRIPTION OF USE
Returns a summary of any active alarms
ALRM
Returns configuration data - model, sn, build date, etc
CONF
B-22 CP4220 User Manual
020-100690-02 Rev. 1 (01-2012)