Monarch Paxar 9450 RASCAL Operator's Handbook Manual page 41

Problem
Printer does not print.
Printer does not start.
Slow or sluggish feeding.
If you continue to have problems:
Remove the battery, wait a few seconds and re-connect
it while pressing [On/Off].
Make sure the battery is fully charged.
Call Monarch at the number at the back of this manual.
Chapter 6. Troubleshooting
Solution
Charge the battery.
Make sure the print job was correct.
Make sure the supplies are loaded
correctly.
Make sure the printhead is closed.
Make sure the battery is charged and
plugged into the printer.
Make sure the printhead is closed.
Make sure the supplies are loaded
correctly.
Make sure no foreign matter is in the
supply spool.
Make sure the supply turns freely in
the supply well.
Check for adhesive buildup in the
feed path and on the peel blade.
6-5