Table of Contents
Advertisement
7. Remove the battery. Press [On/Off] while you re-connect
Connecting the Communications Cable ––––––––––––––––––––––––
To attach the communications cable:
1. Grasp the cable holder and position the connector to
2. Insert the connector into the printer port until the
3. Pull the cable holder gently to make sure it is secure.
4. Plug the other end of the cable into the host.
Do Not carry or drag the printer by the cable. Also, remove
n
the cable when not using the printer.
See Chapter 7, "Specifications," for cable pin definitions.
the battery to return to normal print operations.
match the frame around the printer port.
connector locks into place. You may hear a click as the
latch snaps into place.
Chapter 3. Printer Communications
Printer
Port
Cable
Holder
3-3
Advertisement
Table of Contents
