9450 Operator's Handbook
5. Place the supply holder against the supply roll in the
6. Feed the supply through the printer, as follows.
7. Feed the supplies behind the support frame as shown.
Supply
Guide
8. Remove labels from the backing paper.
Make sure the supplies rest against the back wall of the
n
printer as they exit the supply chute. If not, open the
printhead and realign the supplies. Close the printhead.
2-4
supply well. Make sure the supply turns freely in the well.
Push the printhead lever down to close the printhead.
If the printer is off, turn the knob clockwise to manually
feed the supply through the supply chute.
Push the printhead lever down to close the printhead.
If the printer is on, the printer feeds the supply
automatically.
Supply
Holder
Knob
On/Off
Button
Support
Frame
Supply
Printhead
Lever