Problems And Solutions - Monarch Paxar 9450 RASCAL Operator's Handbook Manual

Problems and Solutions––––––––––––––––––––––––––––––––––––––
Some common printer problems and their solutions are listed
below.
Problem
Battery won't charge.
Label is jammed.
Labels do not peel.
LED indicator is off.
Printer doesn't respond to
host.
Printer locks up with a solid
green LED indicator and will
not respond to key presses.
Chapter 6. Troubleshooting
Solution
Make sure the battery is connected
correctly.
Make sure the charger is plugged into
a live outlet.
Always charge the battery when the
LED indicator is off or slowly blinks
green.
Remove jammed supplies.
Clean the printhead.
Make sure the backing paper is tight.
Make sure the support frame is
locked into place.
Make sure the printer is on.
Turn the printer off and change to a
fully charged battery.
Make sure the printer is not in sleep
mode. Press [On/Off].
Make sure the communications cable
is attached and locked into place.
Make sure the communications
parameters at the printer match the
host.
Put a new, fully-charged battery on
the printer.
6-3