Loading For Non-Peel Mode - Monarch Paxar 9450 RASCAL Operator's Handbook Manual

9450 Operator's Handbook
Loading for Non-Peel Mode ––––––––––––––––––––––––––––––––––
In non-peel mode, supplies can be either die-cut or butt cut
with a maximum size of 2.2 inches.
If you have special label requirements, contact Monarch at the
n
number listed in the back of the handbook.
To load supplies for non-peel mode:
1. Remove the supply holder and any supply that remains.
2. Turn printer on.
3. Tilt the top of printer slightly back.
2-6
Supply
Holder