Monarch Paxar 9450 RASCAL Operator's Handbook Manual page 26

9450 Operator's Handbook
3. Press [Feed] once. The LED indicator blinks once.
4. Press [Feed] twice. The LED indicator blinks twice.
5. Press [Feed] three times. The LED indicator blinks three
6. Press [Feed] four times to exit the communications
3-2
Press [Feed] ...
Once
Twice
Three times
Four times
Five times
Six times
The printer verifies your selection by flashing the LED
indicator once for each time you pressed [Feed].
Press [Feed] ...
Once
Twice
The printer verifies your selection by flashing the LED
indicator once for each time you pressed [Feed].
times.
Press [Feed] ...
Once
Twice
The printer verifies your selection by flashing the LED
indicator once for each time you pressed [Feed].
parameter set mode. A test label prints automatically,
showing the new communications parameters. The LED
indicator goes off.
To set the baud rate to ...
38,400
19,200
9600
4800
2400
1200
To set ...
No parity, 8 data bits, 1 stop bit
Even parity, 7 data bits, 1 stop bit
To set flow control to ...
XON/XOFF
DTR