Table of Contents
Advertisement
9450 Operator's Handbook
If the LED indicator does not come on when you print a test
label, press [On/Off] and [Feed] at the same time and
reattach the battery. Release [On/Off] and wait for the LED
indicator to turn amber before releasing [Feed]. The test label
prints automatically.
For resident Font IDs, the first number is the Font ID number,
n
and the second is the Monarch internal font number used for
internal use only. For example, 1:1000 indicates Font ID 1,
and Monarch internal font 1000. Font 16 is for Monarch
internal use only.
LED Indicator ––––––––––––––––––––––––––––––––––––––––––––––
The LED indicator is located on top of the printer, between
[Feed] and [On/Off]. This LED indicator displays a variety of
printer states. To clear an error, press [Feed]. The table
below explains each state and its meaning.
Do Not ignore the low battery condition. If you continue to
n
print with a low battery, the printer will eventually lock up with
a solid green LED indicator and won't respond to key presses.
If this occurs, put a new, fully charged battery on the printer.
6-2
LED Indicator
Solid green
Solid amber
1/4 second blinking green
1/4 second blinking amber
1/4 second amber/green
2 second blinking green
2 second blinking amber
2 second amber/green
Status
Operational; On-demand mode
Operational; Continuous mode
Label ready to dispense
Online error (e.g., syntax, printing out
of range)
Hardware error (e.g., out of supply,
jam, printhead open)
Low or dead battery
Printhead overheat
Firmware failure
Advertisement
Table of Contents
