Removing Supplies - Monarch Paxar 9450 RASCAL Operator's Handbook Manual

9450 Operator's Handbook
Removing Supplies –––––––––––––––––––––––––––––––––––––––––
To remove supplies:
1. Remove the supply holder as shown.
Supply
Holder
2. Cut or tear the supplies as close to the supply guide as
3. Push the printhead lever up to open the printhead.
Do Not back the labels through the printhead or a supply jam
c
may occur.
4. Turn the knob clockwise to feed the supply out the supply
2-8
possible, and remove the supply roll.
chute.
Knob
Supply
Guide
Supply
Chute
Printhead
Lever