Recalling The Measured Values; Deleting The Measured Values - Hartmann Tensoval mobil Instructions For Use Manual

exceeds 30 the oldest data is deleted and overwritten with the
newest data. You can decide in which memory position your
measuring results are to be stored in order to avoid confusing
the data with that of other persons, or you can, for example,
use one memory position for measurements in the morning and
one for measurements in the evening.

5.2 Recalling the measured values

Press memory button M1 or M2 to view the stored data. The
average of the stored results in the selected measurement
memory is displayed. The last stored result is displayed if only
one value is present. The memory data is displayed for around
30 seconds. 30 seconds after releasing the memory button the
device switches off (fig. 8).
8
Press the memory buttons (M1 or M2) to call up the next mem-
ory data. Memory data number 1 is the most recent value in
the selected measurement memory. The indication at the top of
the display switches between the memory data number, date
and time.
Through alternating pressing of the memory button all the
stored values of the selected measurement memory can be
called up consecutively. The stored values are displayed in order
from the most recent to the oldest.

5.3 Deleting the measured values

Call up the average of a measurement memory to delete all
measurement memory data. Keep one of the memory buttons
66
Average Time