Explanation Of Error Displays - Hartmann Tensoval mobil Instructions For Use Manual

9. Explanation of error displays

Error which has occurred
Excess pressure
Measuring error
Inflation error
Deflation error
Possible causes
The pressure in cuff exceeds 300 mmHg.
Therefore, an automatic fall in pressure
occurs.
Measurement could not be carried out due to
talking or moving. Irregular pulse was meas-
ured.
The cuff has not been applied correctly.
If Err-2 appears several times after the cuff
has been correctly applied, a fault is presum-
ably present.
Movement or talking detected during the
measurement.
Remedy
Please rest for at least a minute and take the
measurement again.
Do not talk or move during the measuring
procedure.
Apply the cuff correctly.
Contact your specialist dealer.
Switch the device off and carry out another
measurement in calm conditions.
70