Setting Date And Time - Hartmann Tensoval mobil Instructions For Use Manual

Replace the lid of the battery
compartment, applying gentle
pressure until the hook snaps
in place (fig. 3).

3.2 Setting date and time

The batteries must have been inserted before you can set the
date and time. Set the date and time correctly so that the
measurement results are stored with the correct date and time
details. The year indication flashes on the display. Use memory
button M1 to increase the flashing year indication and memory
button M2 to decrease it.
Press the blue START/STOP
button to store and continue
to the next step.
The month indication flashes.
Press the M1 or M2 buttons
to display the current month
and store it by pressing the
blue START/STOP button.
The date indication flashes.
Set the date with the buttons
M1 and M2 and press the
blue START/STOP button to
store.
The hour indication flashes.
Set the hour with the buttons
M1 and M2 and press the
Year
blue START/STOP button to
store. The clock operates in
24-hour mode.
62
Month
Day
Hour