Table of Contents
Advertisement
Quick Links
SuperLinet Integrated Access Device
Model 6512-A2
Installation Instructions
Document Number 6512-A2-GN10-30
May 1999
SuperLine
IAD
TM
Front
View
TM
TM
Contents:
H
What Your SuperLine Integrated Access Device (IAD) Does
H
Package Checklist
H
Optional Hardware (Not Supplied)
H
Front Panel Indicators
H
SuperLine IAD Rear Panel
H
Installing Your SuperLine IAD
H
Troubleshooting Your SuperLine IAD
H
Technical Information
H
Technical Specifications
H
Technical Support
H
Important Safety Instructions
TM
P W R
A L M
T S T
L IN E
E T H
E R N
E T
1
Rear
View
98-16014a-02
Advertisement
Table of Contents
Related Manuals for Paradyne 6512-A2
Summary of Contents for Paradyne 6512-A2
-
Page 1: Installation Instructions
SuperLinet Integrated Access Device Model 6512-A2 Installation Instructions Document Number 6512-A2-GN10-30 May 1999 SuperLine Front View Rear View P W R A L M T S T L IN E E T H E R N 98-16014a-02 Contents: What Your SuperLine Integrated Access Device (IAD) Does... - Page 2 What Your SuperLine Integrated Access Device (IAD) Does Your SuperLine IAD is a line adapter that allows you to connect multiple phones, fax machines, or modems using your existing telephone wiring. Existing (BASE) Phone Existing Phone Line Additional Line (PHONE 1/2) Additional Line (PHONE 2) Ethernet Data PW R...
-
Page 3: Package Checklist
Existing Phone Phone SuperLine Filter Line Existing Phone Line Wall Wall Additional Jack Jack Line Existing Phone Phone Filter Line Additional Line 99-16018a-02 Package Checklist Verify that your package contains the following hardware. If any hardware is missing or you need to order additional hardware, contact your service provider. Refer to Technical Information on page 23 for further information. -
Page 4: Optional Hardware (Not Supplied)
Optional Hardware (Not Supplied) The following hardware may be required depending on which configuration you choose to install. You can purchase these items from your local electronics or phone store. 2-Line Phone Cable (RJ14C) If you are connecting a 2-line phone, you may require a 2-line phone cable (24 AWG, RJ14C) as defined in Connecting a 2-Line Phone (with Two Additional Lines) on page 12. -
Page 5: Front Panel Indicators
Front Panel Indicators Power – Green Alarm – Red Test – Yellow Line – Green Ethernet – Green LINE ETHERNET 99-16016a-01 All of the SuperLine IAD’s indicators turn ON and OFF during the power-on self-test. After a successful power-on self-test, the SuperLine IAD’s indicators should appear as indicated in BOLD in the Condition column of the following table: Indicator Condition Status... - Page 6 SuperLine IAD Rear Panel The rear panel of your SuperLine IAD has six jacks. BASE POWER PHONE 2 PHONE 1/2 ETHERNET LINE PHONE 98-16095a Rear Panel Jacks This Jack Allows You To POWER Apply power to your SuperLine IAD. PHONE 2 Connect a phone, fax machine, or modem if you have ordered two additional lines.
- Page 7 Installing Your SuperLine IAD Before you install your SuperLine IAD, read the Important Safety Instructions on page 27. There are several ways to connect your SuperLine IAD, depending on your current phone configuration, data needs (Internet), and future needs. You can connect any combination of two phones, fax machines, or modems through your SuperLine IAD.
- Page 8 Connecting Multiple Phones, Fax Machines, or Modems to Your SuperLine IAD Hardware Required (Supplied) 6-foot RJ11 phone cable. Hardware Required (Not Supplied) Existing RJ11 phone cables. " Procedure Use the following procedure and supporting figure to connect your SuperLine IAD with up to two additional phones, fax machines, or modems in the same room.
- Page 9 To complete your SuperLine IAD installation, refer to Connecting Phone Filters to Your Existing Phones on page 19, and Applying Power to the Unit on page 20. Phone, Fax Machine, or Modem Phone 2 ETHERNET Phone 1/2 Base Phone Line Supplied Cable ETHERNET...
- Page 10 Connecting a 2-Line Phone (with Existing Phone and One or Two Additional Lines) Hardware Required (Supplied) 6-foot RJ11 phone cable. Hardware Required (Not Supplied) Existing RJ11 phone cables. " Procedure Use the following procedure and supporting figure to connect your SuperLine IAD to a single phone with two lines.
- Page 11 Phone, Fax Machine, Phone 2 or Modem Phone 1/2 Base Phone ETHERNET Line Supplied Line 2 Cable Wall Jack Line 1 2-Line Phone 99-16100-02 Connecting a 2-Line Phone (with One or Two Additional Lines) CAUTION: Do not attempt to connect phone cables from the PHONE 1/2 and PHONE 2 jacks to phones located outdoors.
- Page 12 Connecting a 2-Line Phone (with Two Additional Lines) Hardware Required (Not Supplied) A 2-line phone cable (RJ14C) to connect Lines 1 and 2 of your 2-line phone to your SuperLine IAD. Refer to Technical Information on page 23 for RJ14C phone cable pin configuration.
- Page 13 Phone 2 (not used in this configuration) Phone 1/2 Base Phone Line RJ14 Phone 2-Line Cable Phone ETHERNET Wall Jack Phone, Fax Machine, or Modem 99-16036a-02 Connecting a 2-Line Phone (with Two Additional Lines) CAUTION: Do not attempt to connect phone cables from the PHONE 1/2 and PHONE 2 jacks to phones located outdoors.
- Page 14 Connecting a Modem to Your SuperLine IAD Hardware Required (Supplied) A 6-foot RJ11 phone cable. " Procedure Use the following procedure and supporting figure to connect a modem to your SuperLine IAD. NOTE: For optimal performance, do not use the BASE PHONE jack to connect a modem. Modem Connection: ¶...
-
Page 15: Connecting A Modem
Phone 2 Phone 1/2 Base Phone Line ETHERNET Fax/Data Modem ETHERNET Wall Jack Phone, Fax Machine, or Modem 99-16066-02 Connecting a Modem... -
Page 16: Optional Configuration
Optional Configuration If your home or office phone jacks are wired internally with 4 wires (Pins 2, 3, 4, and 5), you may be able to connect phones in other rooms to your SuperLine IAD by using optional hardware purchased from your local electronics or phone store. If you are unsure if your home or office is wired with 4 wires, contact an electrician or your service provider. - Page 17 To complete your SuperLine IAD installation, refer to Connecting Phone Filters to Your Existing Phones on page 19, and Applying Power to the Unit on page 20. 4-Wire Internal Wiring Phone Existing Filter Phone Line 1 Line Phone 2 Additional Phone 1/2 Line Base Phone...
- Page 18 High-Speed Data Service (Not Available in All Areas) The SuperLine IAD allows you to connect to a PC network interface card (NIC) or Hub for high-speed Internet access. Contact your service provider to determine if these services are available in your area. Hardware Required (Not Supplied) Straight-through or crossover Ethernet interface cable.
- Page 19 Connecting Phone Filters to Your Existing Phones " Procedure After you have installed your SuperLine IAD, each phone in your home or office that is connected to the same line as the SuperLine IAD must be connected through a phone filter to minimize background noise during telephone conversations.
-
Page 20: Applying Power To The Unit
Applying Power to the Unit " Procedure After you have installed your SuperLine IAD, use the following procedure to apply power to the SuperLine IAD. ¶ Insert the power cord’s cylindrical plug into the jack labeled POWER on the SuperLine IAD rear panel. ·... - Page 21 Troubleshooting Your SuperLine IAD Symptom Action All indicators remain The SuperLine IAD is not functional. If the indicators remain ON after five minutes, unplug the power cord and plug it back in. If the problem continues, contact your service provider. ALM indicator The power-on self-test has failed.
- Page 22 Symptom Action PWR indicator is OFF. Check that the power cord is securely installed on both ends. If no other indicators are on, the power supply may be defective. Plug the SuperLine IAD into another outlet. If the problem persists, contact your service provider. If other indicators are on, unplug the power cord and plug it back in;...
-
Page 23: Technical Information
Technical Information This section contains reference information. Phone Filter Phone filters are required to minimize audible background noise that occurs with your existing telephones during phone conversations on phones not connected through your SuperLine IAD. 99-16256 RJ11 or RJ14C Phone Cables All standard phones, fax machines, and modems that connect to your SuperLine IAD use a 6-pin, non-keyed modular plug (RJ11 or RJ14C). -
Page 24: Ethernet Cable
Ethernet Cable The Ethernet interface connector uses an 8-pin, non-keyed modular plug. Use the straight-through connection to connect to an Ethernet Hub. 24 AWG, Cat 5 cable is recommended. 8-Pin Straight-Through Connection Ethernet Cable Pin # Function 10BaseT TX D+ 10BaseT TX D–... - Page 25 “T” Type Connector The “T” connector allows additional phones to be connected to your SuperLine IAD from other rooms. If your home or office internal phone wiring uses 4 wires connected to Pins 2, 3, 4, and 5, the “T” connector crosses the normally unused Pins 2 and 5 to Pins 3 and 4 on Line 2 of the SuperLine IAD.
-
Page 26: Technical Specifications
Technical Specifications Item Specification Height x Width x Depth 1.4 x 6.0 x 8.8 (3.6 cm x 15.2 cm x 22.2 cm) Weight 1 lb. 2 oz. (0.5 kg) Power Input: 120 Vac (+10%), 60 Hz Class 2 Transformer normal Output: 18 Vdc nominal at 0.8A service input voltage range... -
Page 27: Important Safety Instructions
— Do not use the telephone to report a gas leak in the vicinity of the leak. Declaration of Conformity This Declaration of Conformity is made by Paradyne pursuant to Parts 2 and 15 of the Federal Communications Commission’s Rules. This compliance information statement... - Page 28 Ringer Equivalence Numbers of all the devices does not exceed 5. If your equipment is in need of repair, contact your service provider. *6512-A2-GN10-30* *6512–A2–GN10–30* Copyright E 1999 Paradyne Corporation...