Paradyne 6512 Quick Installation

SuperLinet IAD Model 6512 Quick Installation
Document Number 6512-A2-GN70-00
SuperLine IAD
(Filter not required)
T M
E E N L I S M T T R W P L A M T
E T H E T R N
¶
Decide what wall jack you will use for your new phone lines. Plug a phone
filter into every other jack where you have existing phones and other devices
attached to the same phone line that the SuperLine IAD will be. (Do not
connect a filter to any device you plug into the SuperLine IAD.) Devices may
include wall phones, cordless phones, answering machines, fax machines,
modems, caller ID display devices, security alarm systems, TV-based
Internet access devices, and direct broadcast satellite receivers. Contact
your service provider if you need more filters.
Phone 1/2
Modem
LINE
PHONE
¹
Connect a phone or other device (such as the line jack of a modem) into the
PHONE 1/2 jack.
*6512-A2-GN70-00*
*6512–A2–GN70–00*
September 1999
99-16510a
·
Go to the room where you want your new phone lines. Plug the phone cord
that came with the SuperLine IAD into the wall jack. Plug the other end of
the phone cord into the LINE jack on the back of the SuperLine IAD.
Fax
99-16510d
º
If you have service for two extra lines, connect a phone or other device (such
as the line jack of a fax machine) into the PHONE 2 jack.
This sheet shows a typical way to use the SuperLine IAD. If you want more information, see the Installation Instructions.
Line
99-16510b
Wall
Jack
¸
Plug your existing phone into the BASE PHONE jack.
Phone 2
99-165510e
»
Plug the power transformer into the POWER jack and an ac outlet.
Base Phone
99-16510c
Existing
Phone
Power
99-165510f
Copyright E 1999 Paradyne Corporation