Optional Hardware (Not Supplied)
The following hardware may be required depending on which configuration you choose
to install. You can purchase these items from your local electronics or phone store.
2-Line Phone Cable (RJ14C)
If you are connecting a 2-line phone, you may
require a 2-line phone cable (24 AWG, RJ14C)
as defined in Connecting a 2-Line Phone (with
Two Superlines) on page 14. Refer to Technical
Information on page 25 for the 2-line phone
cable pin configuration.
Pin #6
Pin #1
98-16067a
"T" Type Connector
If your home or office phone jacks are wired
internally with 4 wires, you may be able to connect
phones in other rooms to your SuperLine Adapter
using a "T" type connector as defined in Optional
Configuration on page 18. Refer to "T" Type
Connector on page 27 for the "T" type
connector pin configuration.
98-16051a
6