Paradyne 6512 Installation Instructions Manual page 16

Superline adaper

Hide thumbs Also See for 6512:

Table of Contents

Connecting a Modem to Your Adapter

Hardware Required (Not Supplied)

An RJ11 phone cable to connect your modem.

Procedure

Use the following procedure and supporting figure to connect a modem to your

SuperLine Adapter.

NOTE:

Any modem can be connected to the PHONE 1, PHONE 2 or BASE PHONE jacks

of your adapter. However, if you have an International Telecommunications Union

(ITU) V.90 standard 56 kbps modem connected to the PHONE 1/2 or PHONE 2

jacks, your SuperLine Adapter allows you to achieve True56K upload and

download speeds.

Modem Connection:

Connect the output of your modem to the PHONE 1/2 or PHONE 2 jack on the

adapter rear panel.

— Use only the PHONE 1/2 jack if you have one additional phone line added.

— Use either the PHONE 1/2 or PHONE 2 jack if you have two additional phone

lines added. You can connect an additional phone, fax machine, or another

modem to the unused jack (PHONE 1/2 or PHONE 2).

To complete your SuperLine Adapter installation, refer to Connecting Phone Filters to

Your Existing Phones on page 21, and Applying Power to the Unit on page 22.

Table of Contents