Table of Contents
Advertisement
Adjustment
12
Lateral alignment of the thread catcher
.07 .02
●
●
●
●
●
74
Requirement
1.
The tip of the thread catcher 5 must point exactly to the center of the needle.
2.
The thread catcher 5 must be horizontal. It must not graze anything when it is opera-
ting.
Fig. 12 - 18
Remove knife 1 (screw 2).
Move needle bar to its BDC.
Loosen stop 3 (screws 4).
Position thread catcher 5 (screw 6) manually in front of the needle.
Align thread catcher 5 (screws 7) according to the requirements.
For further adjustments, leave knife 1 removed and stop 3 loosened.
5
6
6
4
4
3
1
2
5
Advertisement
Table of Contents
