Table of Contents
Advertisement
12
Parameter settings
.12
12
Selecting the user level
.12.01
●
Switch on the machine.
●
If necessary call up the manual sewing mode. (The LED in the key is not illuminated.)
●
Call up parameter input.
●
Call up parameter "798" by pressing the appropriate +/- keys (P) or (S).
●
Enter the appropriate value for the desired user level by pressing the +/- keys (L):
●
Press the TE key to conclude the selection.
As a standard, when the machine is switched on, it is in user level "a". Below is
a description of how to call up the service level "c" via mechanic level "b". The
set values in the parameters of the user level "b" and "c" may only be altered by
appropriately trained personnel!
660a
798a
0
=
operating level "a"
1
=
mechanic level "b"
11 =
service level "c"
After the machine has been switched off and then on again the user level "a" is
reactivated. The corresponding letter "a", "b" or "c" for the current user level is
shown on the display.
0
0
Adjustment
87
Advertisement
Table of Contents
